CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

Pore Pressure Build-Up in Aggregate-Clay Mixtures under Cyclic Loading

عنوان مقاله: Pore Pressure Build-Up in Aggregate-Clay Mixtures under Cyclic Loading
شناسه ملی مقاله: JR_JSEE-22-1_004
منتشر شده در در سال 1399
مشخصات نویسندگان مقاله:

Ali Shafiee - California State Polytechnic University, Pomona, Civil Engineering Department, College of Engineering, CA, USA
Javad Jalili - Assistant Professor, Geotechnical Research Center, International Institute of Earthquake Engineering and Seismology(IIEES), Tehran, Iran,
Hamid Tavakoli - Associate Professor, Civil Engineering Department, Babol Noshirvani University of Technology, Babol, Iran
Mohammad Kazem Jafari - Professor, Earthquake Risk Management Research Center, International Institute of Earthquake Engineering and Seismology (IIEES), Tehran, Iran

خلاصه مقاله:
Undrained behavior of aggregate-clay mixtures in its natural or compacted state, which is used as the core of embankment dams or liner of waste disposal systems, has great importance for geotechnical engineers. Previous studies have shown that excess pore water pressure plays an important role when dealing with cyclic/dynamic behavior of aggregate-clay mixtures. An extensive testing program was conducted on compacted sand-clay mixtures to investigate effects of aggregates on the cyclic behavior of the mixtures under strain- and stress-controlled cyclic loads utilizing triaxial and torsional shear equipment. Clay content was varied from ۱۰۰ to ۴۰% by volume in tested specimens. Isotropically and anisotropically consolidated specimens were tested under vertical effective stresses of ۱۰۰ and۵۰۰ kPa. The aim of the various loading conditions and numerous experiments was to investigate cyclic pore pressure build-up in the mixtures, and developing a pore pressure model based on dissipated energy. The main advantage of the model is that it can capture opposite trend of pore pressure build-up with aggregate content in strain-, and stress-controlled loading. The model is then verified with cyclic triaxial tests on ceramic beads-clay mixtures.

کلمات کلیدی:
Sand-clay mixtures, Pore pressure build-up, Cyclic Triaxial Test, Cyclic torsional shear test, Pore pressure model

صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/1298340/